Info

/Info/

A Travelling Memory Of Ideal-Pro

Ideal-pro is saying "the world is so big, we have to go outside and have a look." We are a team of " be skilled in using both the pen and the rifle," our mission is”seize the day”.  It  is a year of harvest 2016,  thanks to our partners, they believe us and wholeheartedly [...]

By |2016-12-21T14:25:59+00:00December 19th, 2016|Categories: Ideal-Pro Culture|0 Comments

How To Solve The Warping Deformation In The Production?

It is a hot potato that injection plastic products warpage and deformation, mold design shall be put into main emphasis cause molding conditions adjustment is very limited. The reasons and solutions are as following: 1) Deformation of residual stress caused by molding conditions, it is a best way to eliminate stress by reducing injection [...]

By |2016-12-26T15:41:20+00:00May 19th, 2016|Categories: Manufacturing Technique|0 Comments

4 Ways To Solve The Instability Of Size Of Plastic Parts

Description: Plastic parts processing is to make a synthetic resin or plastic into plastic products, which generally include plastic ingredients, molding, machining, bonding, modification and assembly, etc. Due to the high requirements of plastic parts, mistakes  should be avoided in the processing. Hereby analyze 4 parts of the unstability below: 1. Equipment: 1, feeding [...]

By |2016-12-21T14:19:48+00:00May 19th, 2016|Categories: Manufacturing Technique|0 Comments

3 Aspects To Talk About Injection Molding and Product Size Control

With the rapid development of mold industry in recent years, moreover, new technology, new manufacturing process continue to expand and progress,  from traditional experience to software application, it has been a qualitative change. Due to the widely use of CAD, CAM and CAE , it opens up space for our mold and mould product [...]

By |2016-12-22T16:40:49+00:00May 19th, 2016|Categories: Manufacturing Technique|0 Comments

What Is The Effect Of Wall Thickness On The Quality Of Plastic Parts?

There is a great impact on the quality for the thickness of plastic parts processing. When wall thickness is too small,flow resistance will be large, it is difficult to fill the cavity of large and complex plastic parts. Plastic parts processing wall thickness of the minimum size should meet the following requirements:1, Sufficient strength and [...]

By |2017-01-06T13:43:29+00:00May 19th, 2016|Categories: Manufacturing Technique|0 Comments

How To Solve The Dirty Mark Of Injection Molded Parts?

Performance:  unmelted particles near the material head. It is impossible to obtain a smooth surface for thin-walled products. Physical Reasons:  because of the short production cycle of thin-walled products, It has to plasticizing on a high screw speed, so that it can make the melt in the screw barrel to shorten the time remaining. [...]

By |2016-12-27T17:06:21+00:00May 19th, 2016|Categories: Manufacturing Technique|0 Comments