/maria

About maria

This author has not yet filled in any details.
So far maria has created 6 blog entries.

A Travelling Memory Of Ideal-Pro

By |2016-12-21T14:25:59+00:00December 19th, 2016|Categories: Ideal-Pro Culture|

Ideal-pro is saying "the world is so big, we have to go outside and have a look." We are a team of " be skilled in using both the pen and the rifle," our mission is”seize the day”.  It  is a year of harvest 2016,  thanks to our partners, they believe us and wholeheartedly [...]

How To Solve The Warping Deformation In The Production?

By |2016-12-26T15:41:20+00:00May 19th, 2016|Categories: Manufacturing Technique|

It is a hot potato that injection plastic products warpage and deformation, mold design shall be put into main emphasis cause molding conditions adjustment is very limited. The reasons and solutions are as following: 1) Deformation of residual stress caused by molding conditions, it is a best way to eliminate stress by reducing injection [...]

4 Ways To Solve The Instability Of Size Of Plastic Parts

By |2016-12-21T14:19:48+00:00May 19th, 2016|Categories: Manufacturing Technique|

Description: Plastic parts processing is to make a synthetic resin or plastic into plastic products, which generally include plastic ingredients, molding, machining, bonding, modification and assembly, etc. Due to the high requirements of plastic parts, mistakes  should be avoided in the processing. Hereby analyze 4 parts of the unstability below: 1. Equipment: 1, feeding [...]

3 Aspects To Talk About Injection Molding and Product Size Control

By |2016-12-22T16:40:49+00:00May 19th, 2016|Categories: Manufacturing Technique|

With the rapid development of mold industry in recent years, moreover, new technology, new manufacturing process continue to expand and progress,  from traditional experience to software application, it has been a qualitative change. Due to the widely use of CAD, CAM and CAE , it opens up space for our mold and mould product [...]

What Is The Effect Of Wall Thickness On The Quality Of Plastic Parts?

By |2017-01-06T13:43:29+00:00May 19th, 2016|Categories: Manufacturing Technique|

There is a great impact on the quality for the thickness of plastic parts processing. When wall thickness is too small,flow resistance will be large, it is difficult to fill the cavity of large and complex plastic parts. Plastic parts processing wall thickness of the minimum size should meet the following requirements:1, Sufficient strength and [...]

How To Solve The Dirty Mark Of Injection Molded Parts?

By |2016-12-27T17:06:21+00:00May 19th, 2016|Categories: Manufacturing Technique|

Performance:  unmelted particles near the material head. It is impossible to obtain a smooth surface for thin-walled products. Physical Reasons:  because of the short production cycle of thin-walled products, It has to plasticizing on a high screw speed, so that it can make the melt in the screw barrel to shorten the time remaining. [...]